Thread Info
  • State Suggested Answer
  • +1 person also asked this people also asked this
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 5 subscribers
  • Views 5786 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

ESXI + Sophos UTM ASG + 4G USB

Pawel Lenart

Hi, I'm doing some testing on Sophos UTM 9.5 ASG. I have an ESXI 6.0 server with 4G USB dongle connected to it (Huawei E3372). I added a USB controller and SCSI device to map USB to VM but I can't see it when I try to add a new interface under hardware. Am I missing something? Are drivers for those devices loaded when ASG is installing or can they be added later? is 4G supported via ESXI or i need to have a dedicated server for this Sophos ASG installation?



This thread was automatically locked due to age.
Parents
  • 0

    Hi, Pawel, and welcome to the UTM Community!

    At installation, only the drivers for existing devices are loaded.  This is a stripped-down Linux of a security device, so the OS is not plug-n-play.  The recommended NIC for UTM in ESXi is the VMZNET3.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0

    Hi, Pawel, and welcome to the UTM Community!

    At installation, only the drivers for existing devices are loaded.  This is a stripped-down Linux of a security device, so the OS is not plug-n-play.  The recommended NIC for UTM in ESXi is the VMZNET3.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Unfiltered HTML