Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 10 replies
  • Subscribers 7 subscribers
  • Views 16692 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

After up2date, slave node death

papali

 Hi, after the reboot of the slave node after the up2date from 9.413-4 to 9.500-9 release, the boot stops with this error

If I try the command fsck /dev/sda6

$ sh: fsck.ddf_raid_member: not found

Any idea?

The node master is running ok.

Thanks.



This thread was automatically locked due to age.
Parents
  • 0

    I am having this issue as well. Something with the last update must have change the parameter.

     

    Varick

  • 0 in reply to Varick Williams

    To complement my first post, where I wrote that the master node is running OK, but obviously has not been updated.
    Today to take advantage of "request redirection" (new feature of this version) I had to upgrade the master, confessing that I was afraid but in the end did it with no problems.

    The hardware between the 2 nodes is exactly the same.

    I am ready to reinstall the slave node because I do not want to remain without cluster, but I would like to solve the problem in another way.

    Any help is well accepted!!!

    Thanks!!!

     

Reply
  • 0 in reply to Varick Williams

    To complement my first post, where I wrote that the master node is running OK, but obviously has not been updated.
    Today to take advantage of "request redirection" (new feature of this version) I had to upgrade the master, confessing that I was afraid but in the end did it with no problems.

    The hardware between the 2 nodes is exactly the same.

    I am ready to reinstall the slave node because I do not want to remain without cluster, but I would like to solve the problem in another way.

    Any help is well accepted!!!

    Thanks!!!

     

Children
No Data
Unfiltered HTML