Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 1 reply
  • Subscribers 5 subscribers
  • Views 3334 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Backup and Restore process

Yahyaa Bham

Hi,

 

I have 2 SG210 firewall, 1 is in production and 1 is a spare.

 

I have configured the spare with new network layout, vlans, rules etc and would like to apply it to the firewall in production.

 

Is this a simple case of backing up the spare firewall, and restoring it on the production one?



This thread was automatically locked due to age.
Parents
  • +1

    Yes.  Before you start, I would definitely make a backup on your production UTM before continuing...

    Backup the configuration, download it to your PC, connect to the production UTM, upload the config backup to it and then restore.  You will be logged out of your WebAdmin session, so you will need to login again to check on the success of your efforts.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • +1

    Yes.  Before you start, I would definitely make a backup on your production UTM before continuing...

    Backup the configuration, download it to your PC, connect to the production UTM, upload the config backup to it and then restore.  You will be logged out of your WebAdmin session, so you will need to login again to check on the success of your efforts.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Unfiltered HTML