This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Can't cannot to Webadmin at all

Hi i just started to use the software edition of sophos firewall utm i install it using Vmware/hyper-v but when i install finished i type the Ip address it does not prompt me to the website or anything and yes i already type https in front and i even try access to Webadmin on my Host pc/Vmware to no avail.

The ip is https://192.168.2.1:4444

This thread was automatically locked due to age.

Parents

0 dirkkotte over 7 years ago

you have to use a host from within same subnet (192.168.2.10 for example) to connect UTM.

Dirk

Systema Gesellschaft für angewandte Datentechnik mbH // Sophos Platinum Partner
Sophos Solution Partner since 2003
If a post solves your question, click the 'Verify Answer' link at this post.
Cancel
Vote Up 0 Vote Down

Cancel
0 Leong Maks over 7 years ago in reply to dirkkotte

i already typed in the IP i configured it still wont let me sign in to the webadmin ip (192.168.2.100) already tried this and 192.168.2.1 so i already don't know how to do.

here the image
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 Leong Maks over 7 years ago in reply to dirkkotte

i already typed in the IP i configured it still wont let me sign in to the webadmin ip (192.168.2.100) already tried this and 192.168.2.1 so i already don't know how to do.

here the image
Cancel
Vote Up 0 Vote Down

Cancel

Children

0 dirkkotte over 7 years ago in reply to Leong Maks

first try to ping the UTM.

If this don#t work, your VMWare/Hyper-V or Client-network-configuration is not correct.

Dirk

Systema Gesellschaft für angewandte Datentechnik mbH // Sophos Platinum Partner
Sophos Solution Partner since 2003
If a post solves your question, click the 'Verify Answer' link at this post.
Cancel
Vote Up 0 Vote Down

Cancel
0 BAlfson over 7 years ago in reply to Leong Maks

Hi, and welcome to the UTM Community!

As Dirk said, it appears that you're trying to access 192.168.2.100 from an IP that is not in the 192.168.2.0/24 subnet.

Cheers - Bob

Sophos UTM Community Moderator
Sophos Certified Architect - UTM
Sophos Certified Engineer - XG
Gold Solution Partner since 2005

MediaSoft, Inc. USA
Cancel
Vote Up 0 Vote Down

Cancel
0 Leong Maks over 7 years ago in reply to BAlfson

but i when i configured the ip address / subnet mask it's already default on 192.168.2.100 and 255.255.255.0
Cancel
Vote Up 0 Vote Down

Cancel
0 Leong Maks over 7 years ago in reply to dirkkotte

ok so i need 2 interfaces Card for my vmware i tried added but which options?
Cancel
Vote Up 0 Vote Down

Cancel