Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 6 subscribers
  • Views 7902 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Linksys AP

Mcneil Paul Dimatulac

Hi there. i just installed/setup a new Cyberoam CR25iNG to our existing Infrastructure, everything goes smoothly well except our four Linksys AP (WRT1900AC, LAPN600AC) wifi connection. the router doesn't have internet. i assigned all our AP in Static mode and put it in Network Switch. DHCP disable. Can you assist me on how to gain internet connection again to all our AP or step by step procedure. its been two days ago since i start figuring out what the solution for this.



This thread was automatically locked due to age.
Parents
  • 0

    Hi,

    you have posted in the UTM forum not the XG forum.

    Non Sophos APs are just like any other network device and cannot be configured or managed in the XG GUI. You would setup an SSID which connects to the LAN. That is all that is required.

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Reply
  • 0

    Hi,

    you have posted in the UTM forum not the XG forum.

    Non Sophos APs are just like any other network device and cannot be configured or managed in the XG GUI. You would setup an SSID which connects to the LAN. That is all that is required.

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Children
Unfiltered HTML