Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 5 subscribers
  • Views 5068 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

bridge problem on UTM110/120

Moonracker
I created an interface bridge.
 
 
I configured ip address on it.
And now int is not working as i wont
1. HostONE connect to any port works correctly (dhcp, ping)
2. Any other host connected to any port in brigde does not work (dhcp, on static ip (i cant ping HostOne) - i have trafic on host only on out side, in side is 0).

What I configured wrong


This thread was automatically locked due to age.
Parents
  • 0

    Something, somewhere is blocking packets or incorrectly routing them.  When faced with such a mystery, do #1 in Rulz.

    It's important to note that pinging is regulated on the 'ICMP' tab of 'Firewall' and that the "Any" Service includes only TCP and UDP, not any of the other IP protocols.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0

    Something, somewhere is blocking packets or incorrectly routing them.  When faced with such a mystery, do #1 in Rulz.

    It's important to note that pinging is regulated on the 'ICMP' tab of 'Firewall' and that the "Any" Service includes only TCP and UDP, not any of the other IP protocols.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Unfiltered HTML