This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

GRE on the UTM?

I suspect Bob is going to jump on me for this as I've skirted around this issue a few times. So apologies in advance Bob.

Has anybody successfully created a GRE tunnel on the UTM? I understand that this can currently only be done from the CLI and the following document refers to the XG

https://community.sophos.com/kb/en-us/123290

Commands are:

Head Office (202.134.168.202):

console> system gre tunnel add name gre local-gw PortB remote-gw 202.134.168.208 local-ip 5.5.5.2 remote-ip 5.5.5.1

I'm wondering how this translates to the UTM eg PortB in the above command? To me it looks like that should be the termination point eg in above example 202.134.168.202

Branch Office (202.134.168.208):

console> system gre tunnel add name gre local-gw PortB remote-gw 202.134.168.202 local-ip 5.5.5.1 remote-ip 5.5.5.2

And how do the FW rules work on the UTM with regards to the above? The rules in the document refer to the XG (part 3)

Any help would be appreciated here as the time is fast approaching that I'm going to have to provide this.

This thread was automatically locked due to age.

Parents

0 Louis-M over 7 years ago

Well..... first attempt and I can't even run the command. I'm wondering if this is actually supported on the UTM?
Cancel
Vote Up 0 Vote Down

Cancel
0 giomoda over 7 years ago in reply to Louis-M

Mate, this is for XG. On XG, GRE tunnels are officially supported.

Apparently there's a way to do it on UTM, and I'm pretty sure Bob has already answered you about this in the past. You'll need the commands from here and the firewall rules from here.

Please note I haven't tested this and have no way of knowing if this works.

Regards - Giovani
Cancel
Vote Up 0 Vote Down

Cancel
0 Louis-M over 7 years ago in reply to giomoda

Cheers Giovani,

I did grab the commands from the knowledge base and quickly realised that they weren't going to work. Completely forgot about the links you sent so I will give them a shot.
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 Louis-M over 7 years ago in reply to giomoda

Cheers Giovani,

I did grab the commands from the knowledge base and quickly realised that they weren't going to work. Completely forgot about the links you sent so I will give them a shot.
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data