Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 4 replies
  • Subscribers 5 subscribers
  • Views 2725 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Install with temporary IP and Hostname

Christian Maak

Hello,

 

I have to migrate the settings from an endian firewall to a new SG 135W.

The goal is to have the same hostname and IP address as the existing firewall at the end of the migration.

So I wondered if I can give the Sophos UTM a temporary IP and temporary hostname in my domain and change this settings as a last step.

Is this possible? Is there a better way to reach my goal?

 

thank you,

Christian



This thread was automatically locked due to age.
Parents
  • 0

    Hi, Christian, and welcome to the UTM Community!

    You can change the hostname after the fact, but it's not ideal.  Go ahead and give it the current, correct, final FQDN as its name, but a different IP temporarily.  If you've already given it a temporary name, change it by applying The Zeroeth Rule in Rulz.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0 in reply to BAlfson

    Hi Bob,

     

    thank you for your suggestion, but in that particular project it was an in place exchange of an old firewall.

    The FQDN was already in use by the old fw and had to be migrated too.

    The Rulez come in handy though.

     

    Best, 

    Chris

  • 0 in reply to Christian Maak

    I've done that several times, Chris, and have never come across a situation where the new UTM didn't get baptized with the existing FQDN.  What special situation did you have that required a temporary name?

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0 in reply to Christian Maak

    I've done that several times, Chris, and have never come across a situation where the new UTM didn't get baptized with the existing FQDN.  What special situation did you have that required a temporary name?

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Unfiltered HTML