Unstable Sophos UTM 9 - please help

I'm running my UTM on a Dell 7010 but with a Dual Intel NIC and Single Intel NIC card.

The dual LAN Port card is my bridged LAN ports and the other single Intel Card is my WAN port.

I have yet to see any dropouts with this setup.

I made sure the bios is setup with NO power management and disabled C-States.

I'm running my UTM on a Dell 7010 but with a Dual Intel NIC and Single Intel NIC card.

The dual LAN Port card is my bridged LAN ports and the other single Intel Card is my WAN port.

I have yet to see any dropouts with this setup.

I made sure the bios is setup with NO power management and disabled C-States.

Well, I just can't get Sophos UTM to work on my Dell Optiplex with two Intel NICS. It's a shame. I wonder why....

Sven, does #7 in Rulz offer any help?

Cheers - Bob

Hi, I haven't see this one, but first sight looks great. I will check it out and let you know!

Hi,

I am so sorry for my incredible late answer in this thread. I am now able to continue this issue. I've tried the tips in Rule #7 without success. A MTU of 1350 didn't help.

What happens during a speed test is that download is ok. But when uploading the speed is trash. Sometimes it goes high only to go low, and then the WAN interface goes down for a short while. Any more ideas??

See images:

I've given up on the Mintbox and try to concentrate on the Dell Optiplex. I tried with the lastest 9.5 firmware but still the same problem (see previous post).

So the NICs are one integrated Intel 82578DM  and the other one is a brand new Intel Pro 1000 GT.

Can anyone please help?

Sven, try a google on

site:community.sophos.com/products/unified-threat-management/f external state down

The first result is a 10-year-old thread with a lot of suggestions for you.

Cheers - Bob

Hi Bob,

Maybe I didn't find the correct thread, because all I can see are suggestions about restarting the cable modem. I believe the issue in this thread is that the WAN link is down all the time.

My problem is that it just temporarily goes down every time I do a speed test or maximize my connection, and it's only for a few seconds.

Other info: I live in Norway and the cable modem is basically a fiber modem in transparent mode. I can't access it in any way. This means I can't adjust the connection speed or anything like that. It just passes all the traffic through. The fiber cable is terminated inside it and I have a RJ45 WAN port. I get DHCP from my ISP.

Hmm, it sounds like you either need a different NIC for your External interface or that the fault lies in the fiber modem.  If the problem persists when you connect a PC directly to the modem, does your ISP have any throttling in place?

Cheers - Bob
PS Norway?  Check out my son Richie in the Alt for Norge reality show.  The 12th episode of the current season airs on Sunday.

Hi Bob,

Thanks for your reply!

1. So it's likely that the built-in Intel 82578DM NIC is not compliant?

2. Would it be worth a try to change the 'order' of the adapters? To use the Intel Pro 1000GT as the WAN interface and the other as the LAN interface? Can you do this without reinstall?

3. What is a recommended compliant NIC with dual GB-port that I can install into a PCI-port? (not PCIe).

4. Norway it is :-) I don't have access to that channel but I'll try to download it somewhere. Which one is Richie? https://www.facebook.com/altfornorge/photos/rpp.116676995010503/1616113921733462/?type=3&theater

Rgds,

Sven David

Hei Sven David,

1. Maybe.  #7 in Rulz includes "(NOT an Intel 82574 based NIC due to bugs from Intel that aren't fixed - the 210 series is good)"

2. Definitely worth a try.

4. The tall, really handsome one with the long blond hair. [;)]

Cheers - Bob