Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 5 subscribers
  • Views 1901 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Multipath on 2 different site UTMs?

Louis-M

We have 2 sites, each with a SG310 UTM in active/passive mode (4 UTM's in total)

Each site has a fibre connection to the web

Both sites are connected via a dedicated 100mb link.

Is it possible to use multipath so that if the internet link drops on one site, traffic destined for the internet will be rerouted to the other site via the 100mb link?

This would also apply vice versa.



This thread was automatically locked due to age.
  • 0

    Louis, this can be done either with an IPsec tunnel bound to the interface to the fibre connection or with a RED tunnel.  You then can use Multipath rules or static routing.  Try a Google on site:community.sophos.com/products/unified-threat-management/f fail over to red connection and a similar one for IPsec.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0 in reply to BAlfson

    Hi Bob,

    I can set a vlan all the way down to the other site (50km away) on a 100mb private link but was just wondering where it would terminate?

    I'm thinking perhaps I could set up a /29 between the 2 UTM's with a dedicated interface on each UTM?

Unfiltered HTML