Thread Info
  • Locked Locked
  • Replies 4 replies
  • Subscribers 6 subscribers
  • Views 4613 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

2 10 G fiber ports wont connect on reboot.

OldSchool

I have a sg310 with 1 copper 1000 connection and 2 10G fiber connections to the main swith

they are link Aggregation to the switch with LACP enable on those 3 ports in the switch.

when I reboot the firewall, the 2 10G ports wont connect to the switch and we are dead in the water.

I go unplug the 2 fiber cables, then ping the firewall a couple times, the copper line sees me, then i reconnect the fiber cables and life is good.

ideas?



This thread was automatically locked due to age.
Parents

  • While waiting for responses here, have your reseller get a ticket open with Sophos Support.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply

  • While waiting for responses here, have your reseller get a ticket open with Sophos Support.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Unfiltered HTML