Thread Info
  • State Not Answered
  • +1 person also asked this people also asked this
  • Locked Locked
  • Replies 2 replies
  • Subscribers 7 subscribers
  • Views 3532 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Swap Memory Steadily Increasing

MOliver

Hey Everyone, 

I'm quite new to the Sophos world, I recently installed a SG115 UTM and I have to say it is running fantastic.  

While checking up on it to make sure it is running healthy, I have been noticing the swap usage increasing steadily at about 2-3% daily. Interestingly enough, the actual memory has not yet once hit 100% so I am not sure as to why it is swapping. 


I am running UTM 9.405-5

When I look at Support > Advanced > Process List, this process appears to be the big spender. 

810      29456  2.5 31.0 1565292 1228076 ?     Ssl  Sep13  38:34 /var/chroot-http/usr/bin/httpproxy -f -c /var/chroot-http -u httppr

Anyone have any thoughts or Ideas as to what could be going on?

--

Thanks!

Matt



This thread was automatically locked due to age.
Parents
  • 0

    I just wanted to add, the beginning of the slope was when I had enabled dual scanning in order to turn on sandstorm.

    As a test I disabled dual scanning, and I'll see  if the swap stays at the same level. I hate to throw the word memleak, but it seems to be behaving that way. Albeit a very very very slow leak.

    Also, is dual scanning a must for sandstorm?

Reply
  • 0

    I just wanted to add, the beginning of the slope was when I had enabled dual scanning in order to turn on sandstorm.

    As a test I disabled dual scanning, and I'll see  if the swap stays at the same level. I hate to throw the word memleak, but it seems to be behaving that way. Albeit a very very very slow leak.

    Also, is dual scanning a must for sandstorm?

Children
  • 0 in reply to MOliver

    You can have single scan if you select the Sophos scanner in 'Management >> System Settings'.  Also, try updating to 9.407 to see if that resolves your issue.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Unfiltered HTML