Hardware, Installation, Up2Date, Licensing Fix UTM build blunder

UTM Firewall requires membership for participation - click to join

This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Fix UTM build blunder

Tab_Man over 8 years ago

How to correct my building b

My build:

Gigabyte B150N-GSM
I3
8 gb ram

My foolish mistake is that I did not pay attention to see that there is no VGA. The motherboard only offers HDMI and the install gets stuck at 66%.

The motherboard also has Dual Gig nics and during install only detects one before getting stuck at %66.

Is there anything I can do to rectify the HDMI, USB vga?

This thread was automatically locked due to age.

Parents

TheMeridian over 8 years ago
This worked for me: When the installer hangs at 66% on the "Hardware Detection" screen:

Press [Alt]+[F2] to bring up the console window.

At the command prompt type cd /usr/lib and press [Enter].

At the next prompt type bootstrap --install and press [Enter]. Apparently, this starts a second instance of the installer that does not get stuck on the "Hardware Detection" screen.

More details here: https://community.sophos.com/products/unified-threat-management/f/52/t/80213
Cancel
Vote Up 0 Vote Down

Cancel

Reply

TheMeridian over 8 years ago
This worked for me: When the installer hangs at 66% on the "Hardware Detection" screen:

Press [Alt]+[F2] to bring up the console window.

At the command prompt type cd /usr/lib and press [Enter].

At the next prompt type bootstrap --install and press [Enter]. Apparently, this starts a second instance of the installer that does not get stuck on the "Hardware Detection" screen.

More details here: https://community.sophos.com/products/unified-threat-management/f/52/t/80213
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data