Thread Info
  • Locked Locked
  • Replies 3 replies
  • Subscribers 7 subscribers
  • Views 5260 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

High Availability Software + Appliance

ChrisBell

Hi there,

Has anybody had any luck getting HA to work with a physical and software unit in the cluster?

Is this a supported feature?

Cheers,

Chris



This thread was automatically locked due to age.
Parents

  • Hi, Chris, and welcome to the UTM Community!

    If by "hardware," you mean a Sophos/Astaro hardware appliance, then you've already gotten your answer from Diep and Giovani.  If you mean that you have your own hardware and are running the UTM software appliance on it, then the answer to your question is "yes" if you configure both with the same number of active NICs.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply

  • Hi, Chris, and welcome to the UTM Community!

    If by "hardware," you mean a Sophos/Astaro hardware appliance, then you've already gotten your answer from Diep and Giovani.  If you mean that you have your own hardware and are running the UTM software appliance on it, then the answer to your question is "yes" if you configure both with the same number of active NICs.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Unfiltered HTML