This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

I am also going to an APU..

I am also moving my home version of UTM from an old generic appliance box to the new APU2. APU2 is more powerful but no kbd or screen.

I am wondering whether there is anyway to install on the old box (profiting from kbd and screen), and then to move the newly installed SSD to the new box?

I guess this would be too easy? How hardware specific is the UTM install?

If not, I will have to go the blind route....

Thanks for any feedback!

This thread was automatically locked due to age.

Parents

0 mikeboss over 8 years ago

the newest ISOs now do support the serial console (only during installation) so you can install onto an APU2, no problems.

regards,

michael
Cancel
Vote Up 0 Vote Down

Cancel
0 RezaFarman-Farmaian over 8 years ago in reply to mikeboss

That's great news - thanks!

I should receive the APU this week, and will let everyone know...
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 RezaFarman-Farmaian over 8 years ago in reply to mikeboss

That's great news - thanks!

I should receive the APU this week, and will let everyone know...
Cancel
Vote Up 0 Vote Down

Cancel

Children

0 GerdMehsel over 7 years ago in reply to RezaFarman-Farmaian

Hi,

I think about installing UTM on an APU.2C4 for home use. Is there a small how to achieve the installation in more detail? Never really used serial console...

Thanks a lot,
Gerd
Cancel
Vote Up 0 Vote Down

Cancel
0 DomNik over 7 years ago in reply to GerdMehsel

Hi Gerd,

you can find some tips here:

http://www.pcengines.info/forums/?page=post&id=16318C5E-6CD0-4527-8AEA-B718D5DE23F8&fid=1A77794F-FF7D-44CA-AF64-CAA2588102ED&cachecommand=bypass&pageindex=1

I would recommend the installation with a USB DVD drive as the installation from a USB stick somehow never worked for me.

Greetings

DomNik
Cancel
Vote Up 0 Vote Down

Cancel