Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 7 replies
  • Answers 2 answers
  • Subscribers 8 subscribers
  • Views 9438 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

UTM 9.402-7 SSL VPN users no longer able to browse network

MasonWebster

We have an SG-210 that I updated from 9.355-1 to 9.402-7, and now our SSL VPN users can no longer browse our network via IP address or computer name. The users are able to connect to the firewall and obtain an IP address, and there are no errors in the logs. Has something changed with how SSL VPN users are handled?

Any help would be appreciated; it's very important that our remote people can connect to our network shares.

Thanks.



This thread was automatically locked due to age.
Parents
  • 0

    We had a similar problem.

    After some checks we figured out, that a SSL client gets too many routes pushed. We had inside the SSL configuration several allowed Groups and Users. The connecting SSL client gets all routes pushed for every participation in a allowed Group. By removing all the allowed Groups and just adding the Users a single time the problem was solved.  

Reply
  • 0

    We had a similar problem.

    After some checks we figured out, that a SSL client gets too many routes pushed. We had inside the SSL configuration several allowed Groups and Users. The connecting SSL client gets all routes pushed for every participation in a allowed Group. By removing all the allowed Groups and just adding the Users a single time the problem was solved.  

Children
No Data
Unfiltered HTML