This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

UTM 9.402 Soft-Release

Hi all,

UTM 9.402 has been Soft-Released today and can be found on the FTP server as usual (ftp://ftp.astaro.de/UTM/v9/up2date/u2d-sys-9.401011-402007.tgz.gpg).

Here is the changelog:

News

  • Maintenance Release

Remarks

  • System will be rebooted
  • Connected REDs will perform firmware upgrade
  • Connected Wifi APs will perform firmware upgrade

Bugfixes

  • NUTM-1955 [Access & Identity] 35658: VLAN Interface on top of a bridge disappears from Slave after Reboot
  • NUTM-1958 [Access & Identity] 34242: Communication error with Amazon AWS server
  • NUTM-2129 [Access & Identity] 36050: File Copy from network share over RED50 does not work in one direction
  • NUTM-2234 [Access & Identity] 35592: Backup from 220 to 230 caused eth3 to exist two times
  • NUTM-2449 [Access & Identity] 36228: RED Server sends more peers as peers are configured
  • NUTM-2706 [Access & Identity] Still coredumps from argos after installing the new fix from mantis 35353
  • NUTM-2842 [Access & Identity] 35423: irqd: Support more than 32 cpus
  • NUTM-2844 [Access & Identity] 36028: 82546GB Gigabit Ethernet Controller: Reset adapter / Detected Tx Unit Hang
  • NUTM-2950 [Access & Identity] RED15: fix dnsmasq for transparent/split
  • NUTM-3049 [Access & Identity] 36382: reds-interface does not get IP after re-activating RED device
  • NUTM-3083 [Access & Identity] IPv6 address in log line shortened
  • NUTM-3190 [Access & Identity] IPsec site-to-site: Limit of listening interfaces of 300
  • NUTM-3252 [Access & Identity] High disk I/O during pattern update on smaller UTM appliances
  • NUTM-3522 [Access & Identity] RED15 with static uplink and dns name as utm hostname doesn't work correctly
  • NUTM-3661 [Access & Identity] After deleting red15w mdw crashes
  • NUTM-1371 [Basesystem] 35523: adbs-maintenance.plx - ERROR: canceling autovacuum task - waits for ShareUpdateExclusiveLock/AccessExclusiveLock
  • NUTM-1798 [Basesystem] 35862: Confd doesn't check for valid local time which can lead to dashboard error
  • NUTM-2804 [Basesystem] 36226: Network Utillization on HW LCD doesn't match iftop and webadmin values
  • NUTM-3325 [Email] Bug on Malware scanning UI Text
  • NUTM-3558 [Email] Sandbox result shows up in messages
  • NUTM-3575 [Email] Detailed view defective for Sandstorm pending mails
  • NUTM-3582 [Email] smtpd sometimes gets stuck when creating a cluster
  • NUTM-3620 [Email] Add capabilities to Quarantine manager's spool tab to handle multiple items for the same massage
  • NUTM-2015 [HA/Cluster] Prevent users from changing postgres_secret
  • NUTM-2290 [HA/Cluster] Prevent backup import from changing postgres_secret
  • NUTM-2677 [HA/Cluster] 36293: The Slave node in HA doesn't show any resource usage
  • NUTM-1956 [Network] 35582: flow monitor invents traffic on wlan1 interface
  • NUTM-2236 [Network] 34828: don't start dhclient without interface
  • NUTM-3156 [Network] Slave interface IP where WAF is listen to get lost after a while
  • NUTM-3304 [Network] nic-naming: Provide a fix for delayed 210r2 software support
  • NUTM-3176 [Reporting] In web usage reporting some domains show up as only the suffix
  • NUTM-2779 [WAF] WAF - Slow HTTP error messages do not match the description
  • NUTM-3175 [WebAdmin] It is not possible to select a vlan interface for the "Ping Check"
  • NUTM-3177 [WebAdmin] Sort function in EPP manage computer didn't work correctly
  • NUTM-3184 [WebAdmin] Etc\Greenwich set as timezone causes error on dashboard
  • NUTM-3185 [WebAdmin] Issues while using the "Search Log Files" tab in the "View Log Files" part of webadmin
  • NUTM-3311 [WebAdmin] Remove Support for TLS v1.0 from Apache Configuration
  • NUTM-3109 [Web] Proxy stops working without segfault or hint in the logs
  • NUTM-3114 [Web] ADSSO join didn't work with special characters like \xF6
  • NUTM-3123 [Web] HTTP Log is flooded with "Server delivered only 0 of X bytes" messages
  • NUTM-3124 [Web] HTTP proxy intermittently stuck in 'recv: Input/output error'
  • NUTM-3577 [Web] High CPU Load after update to 9.4
  • NUTM-3076 [WiFi] Split network modes do not work with RED15w
  • NUTM-3418 [WiFi] RED15w forgets its wireless encryption key after reboot
  • NUTM-3188 [[Backend/Devel] Confd] Domain-Regex object deployed from SUM will be created more than once
  • NUTM-3189 [[Backend/Devel] Confd] Auto packetfilter rule is not updated if the destination service object of a NAT will be changed

Regards

/talex



This thread was automatically locked due to age.
Parents
  • Hi Talex,

    Suddenly NAT rules cannot be deleted anymore (after 402-7 upgrade ) :-(

    Do rules have to be disabled now, as a new feature? :-)

    -----

    Best regards
    Martin

    Sophos XGS 2100 @ Home | Sophos v20 Technician

  • think i found a bug:


    since update from 9.355-1 to 9.402-7 my IPSEC-VPN-Tunnels dont come up again when DSL-Lines reconnect.

    can only be fixed with shutting down all ipsec-tunnels and get them online again...

    anyone knows more about this?

    greets

    zaphod
    ___________________________________________

    Home: Zotac CI321 (8GB RAM / 120GB SSD)  with latest Sophos UTM
    Work: 2 SG430 Cluster / many other models like SG105/SG115/SG135/SG135w/...

Reply
  • think i found a bug:


    since update from 9.355-1 to 9.402-7 my IPSEC-VPN-Tunnels dont come up again when DSL-Lines reconnect.

    can only be fixed with shutting down all ipsec-tunnels and get them online again...

    anyone knows more about this?

    greets

    zaphod
    ___________________________________________

    Home: Zotac CI321 (8GB RAM / 120GB SSD)  with latest Sophos UTM
    Work: 2 SG430 Cluster / many other models like SG105/SG115/SG135/SG135w/...

Children
  • I`ve got same problem here. Sophos UTM 230 updated to 9.402-7 with 2 uplinks, a sDSL line and a vDSL line. All clients are Fritzbox 7490. Clients configured with a S2S IPSEC tunnel.

    Clients connected through sDSL works fine, but vDSL connected VPN clients don`t come up after clientside Fritzbox reconnect every day because of provider disconnect every 24 hours.

    After shutdown and reactivation of ALL S2S IPSEC tunnels, sDSL and vDSL connected tunnels get online again.

  • PUSH

    Sophos please investigate the DSL IPSec Reconnect error

    greets

    zaphod
    ___________________________________________

    Home: Zotac CI321 (8GB RAM / 120GB SSD)  with latest Sophos UTM
    Work: 2 SG430 Cluster / many other models like SG105/SG115/SG135/SG135w/...