Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 7 replies
  • Answers 1 answer
  • Subscribers 8 subscribers
  • Views 11312 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

USB on front of SG310 - what can it be used for?

Louis-M

I bet the answer is..... for future development (roughly translated means, it's there but unlikely to ever be used by the time the appliance has been superseeded)



This thread was automatically locked due to age.
Parents
  • 0

    Hello Luis-M,

    You can install a new system image.

    Download a Hardware-Appliance-Image *.iso,

    Burn it on a CD/DVD.

    Plug a USB DVD/CD Drive in the USB Port of the SG.

    Power On the SG Appliance and wait. (the system starts DVD/CD on the plugged power on USB CD/DVD-device)

    Watch the LCD-Display. (partitioning, formating,....) (circa. 7 minutes)

    If the procedure is finished, start the SG and you have a renewed Appliance.

    Remember: You will lost all your configuration and data.

    Instead of this, You can use a USB Smart Installer. See this:

    https://www.sophos.com/de-de/support/utm-downloads/utm-smart-installer.aspx

    http://blog.tresw.com/english/installing-sophos-utm-9-x-from-a-usb-memory-stick/

    Usefull if You plan to use a second device to configure the HA Option and your slave device

    is delivered with a older UTM-Release.  For the Startup procedure to configure HA, you need the same

    UTM-Release.

    As Well:

    Restore the physical device from a USB flash drive
    This can be done using an unencrypted backup (.abf extension) in a FAT formatted USB flash drive.

    1. Copy the backup file to the USB flash drive.
    2. Turn off the UTM.
    3. Plug the USB flash drive into the UTM.
    4. The device will boot from the USB flash drive and restore to the unencrypted backup.

    Note: If several backup files are stored on the flash drive, the file that comes first
    lexicographically (numbers before letters) will be used. For example,
    firewall_backup_2016-04-17.abf and 2015-11-20_firewall_backup.abf are both stored on the
    USB flash drive. When the device turns on, the second file will be used because it begins with a number.

    see:

    https://www.sophos.com/de-de/support/knowledgebase/119814.aspx

Reply
  • 0

    Hello Luis-M,

    You can install a new system image.

    Download a Hardware-Appliance-Image *.iso,

    Burn it on a CD/DVD.

    Plug a USB DVD/CD Drive in the USB Port of the SG.

    Power On the SG Appliance and wait. (the system starts DVD/CD on the plugged power on USB CD/DVD-device)

    Watch the LCD-Display. (partitioning, formating,....) (circa. 7 minutes)

    If the procedure is finished, start the SG and you have a renewed Appliance.

    Remember: You will lost all your configuration and data.

    Instead of this, You can use a USB Smart Installer. See this:

    https://www.sophos.com/de-de/support/utm-downloads/utm-smart-installer.aspx

    http://blog.tresw.com/english/installing-sophos-utm-9-x-from-a-usb-memory-stick/

    Usefull if You plan to use a second device to configure the HA Option and your slave device

    is delivered with a older UTM-Release.  For the Startup procedure to configure HA, you need the same

    UTM-Release.

    As Well:

    Restore the physical device from a USB flash drive
    This can be done using an unencrypted backup (.abf extension) in a FAT formatted USB flash drive.

    1. Copy the backup file to the USB flash drive.
    2. Turn off the UTM.
    3. Plug the USB flash drive into the UTM.
    4. The device will boot from the USB flash drive and restore to the unencrypted backup.

    Note: If several backup files are stored on the flash drive, the file that comes first
    lexicographically (numbers before letters) will be used. For example,
    firewall_backup_2016-04-17.abf and 2015-11-20_firewall_backup.abf are both stored on the
    USB flash drive. When the device turns on, the second file will be used because it begins with a number.

    see:

    https://www.sophos.com/de-de/support/knowledgebase/119814.aspx

Children
Unfiltered HTML