This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Setting up a SG230 without an internet connection

Hi I was wondering if it is possible to set up a SG230 without being connected to the internet?

We would like to configure the unit before swapping it with our current firewall.

Regards



This thread was automatically locked due to age.
Parents
  • Hi, Paul, and welcome to the UTM Community!

    As Sachin says, yes.  There are some tricks that can simplify this for you.  If this is the first UTM you are configuring, I would strongly recommend getting an experienced UTM installer to do the initial design.  Once configured correctly, the UTM is a dream to administer and maintain.  I usually have to charge at least twice as much to straighten out an in-artful configuration.  If your reseller isn't specifically competent with UTM initial configurations, ask Sophos Sales for recommendations in your area.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • Hi, Paul, and welcome to the UTM Community!

    As Sachin says, yes.  There are some tricks that can simplify this for you.  If this is the first UTM you are configuring, I would strongly recommend getting an experienced UTM installer to do the initial design.  Once configured correctly, the UTM is a dream to administer and maintain.  I usually have to charge at least twice as much to straighten out an in-artful configuration.  If your reseller isn't specifically competent with UTM initial configurations, ask Sophos Sales for recommendations in your area.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data