Hello,
i have a new SG330 for testing here, Firmware is up2date (9.355-1). But i have the Problem that the Time does not sync with the configured Time Servers. If i view the output of ntpq on the console i could see that the server never connects to the configured time-servers.
I also made a factory reset, but still the same.
If i use a time server from my local network, everything works.
any Ideas?
Output from ntpq -p on SG330
ntpq -p
remote refid st t when poll reach delay offset jitter
==============================================================================
LOCAL(0) .LOCL. 10 l - 128 0 0.000 0.000 0.000
frank2.askja.de .INIT. 16 u - 128 0 0.000 0.000 0.000
dn3t.de .INIT. 16 u - 128 0 0.000 0.000 0.000
gromit.nocabal. .INIT. 16 u - 128 0 0.000 0.000 0.000
if i make the same configuration (firewall, nat, timeserver ...) on my utm home (9.370) everything works as expected:
ntpq -p from utm home edition:
remote refid st t when poll reach delay offset jitter
==============================================================================
LOCAL(0) .LOCL. 10 l - 128 0 0.000 0.000 0.000
+citadel.noetech 212.82.32.15 2 u 18 32 167 15.819 -0.436 1.746
*frank2.askja.de 130.149.17.8 2 u - 32 377 15.873 0.406 0.858
+rs000486.fastro 192.53.103.108 2 u 29 32 377 15.473 0.722 0.719
Peter
This thread was automatically locked due to age.
