Thread Info
  • State Not Answered
  • +1 person also asked this people also asked this
  • Locked Locked
  • Replies 18 replies
  • Subscribers 3 subscribers
  • Views 33155 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

[9.312] Intel 82572EI e1000e Hardware Unit Hang

BarryG
Hi,

I have rebuilt one of my firewalls, using a Z87 motherboard and an Intel 82572EI PCIe NIC as eth1/WAN.

I'm now getting a LOT of e1000e "eth1: Detected Hardware Unit Hang" messages, and the firewall stops responding on ALL interfaces including LAN.

I notice the UTM says it is disabling TSO, but that doesn't seem to be enough.

If I run
ethtool -K eth1 tso off gso off  gro off
it gets MUCH better (maybe solved).

Where should I add this to init or udev?

lspci:
01:00.0 Ethernet controller: Intel Corporation 82572EI Gigabit Ethernet Controller (Copper) (rev 06)

Thanks,
Barry


This thread was automatically locked due to age.
Parents
  • 0
    lspci -vv:
    01:00.0 Ethernet controller: Intel Corporation 82572EI Gigabit Ethernet Controller (Copper) (rev 06)
            Subsystem: Intel Corporation PRO/1000 PT Server Adapter
            Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
            Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 8086:107d(rev 06)
            Subsystem: 8086:1084
            Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
            Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 
Reply
  • 0
    lspci -vv:
    01:00.0 Ethernet controller: Intel Corporation 82572EI Gigabit Ethernet Controller (Copper) (rev 06)
            Subsystem: Intel Corporation PRO/1000 PT Server Adapter
            Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
            Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 8086:107d(rev 06)
            Subsystem: 8086:1084
            Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
            Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 
Children
No Data
Unfiltered HTML