Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 17 replies
  • Subscribers 4 subscribers
  • Views 23299 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos UTM 220 9.306 -6 CPU usage reaches 100%

lite
Hi All,

I am having a problem with the Sophos UTM since it reaches 100% usage of cpu utilization.

I checked it on the logs and find out that postgres is eating cpu usage 100%


This thread was automatically locked due to age.
Parents
  • 0
    check the log retention - keep that down and it'll be better.
    Also increase the swap. 

    My update to the SG230's seems much better in my environment, but it's been less than a week in prod so time will tell.
Reply
  • 0
    check the log retention - keep that down and it'll be better.
    Also increase the swap. 

    My update to the SG230's seems much better in my environment, but it's been less than a week in prod so time will tell.
Children
  • 0 in reply to maxsecobj
    check the log retention - keep that down and it'll be better.
    Also increase the swap.


    The best way would be a clean install, i don't want to use a swap file.
    There is some free disk space (4GB), so i have two ways of breaking support, increase RAM to 4GB or adding a swap partition. :-(

    My update to the SG230's seems much better in my environment, but it's been less than a week in prod so time will tell.


    I don't want Sophos to force a hardware upgrade on this way.
    One cluster of UTM-220s has been bought last year and they were running very fine.
Unfiltered HTML