This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

AP 15 slow download speed

Hi,

I'm using an UTM SG105w (Wi-Fi integrated, firmware 9.305) and have also attached an AP 15 to increase the range. Both are configured to the same WiFi network. The AP15 is connected with a CAT-7 cable (10 metres). This setup is working, roaming also works flawlessly.

When I'm connected to the AP from the UTM, I can download files at 40 MBit/s. When I'm connected to the AP 15, I can download the same file with only 1,5 MBit.

We have got an UTM 220 (firmware 9.209) at work, and we have connected my AP 15 to this UTM. This time, clients that were connected to the AP 15 could download at full speed.

Why is the AP 15 so terribly slow when it is connected to the SG105w?

Best,
Ben

This thread was automatically locked due to age.

Parents

0 Crisman over 9 years ago

Twister5800 is correct, there's a known bug on version 9.3 regarding the Wireless Protection with separate zones, you've to change the MTU for that zone.
Cancel
Vote Up 0 Vote Down

Cancel
0 DennisBuck over 9 years ago in reply to Crisman

Changing MTU to 1280 worked for me and my AP100.

This is the first thread that came up when I searched, so thanks for posting the solution here.
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 DennisBuck over 9 years ago in reply to Crisman

Changing MTU to 1280 worked for me and my AP100.

This is the first thread that came up when I searched, so thanks for posting the solution here.
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data