I've been trying to install UTM 9.3 for the last several hours, but I keep getting the same error. "No appliance hardware has been detected. Please check your hardware and/or contact the Sophos support team." I would attach the error log, but am unable to save it to USB for some strange reason. The log output leading up to the failure is:
Checking for old installation on '/dev/sda6'
system: mount -t auto /dev/sda6 /dest
mount: mounting /dev/sda6 on /dest failed: No such file or directory
system: returned with exit status 255
ui_msg_file_va: id=hw_detect_no_appl
END task 'configuration'
...
I have wiped the hdd with DBAN (twice) and have swapped nics & hdds with other known good ones. I have tried the install from USB, and when that failed, from DVD. Any idea what's causing this?
...
System specs:
P4 @ 3.06GHz
2GB DDR2-5300
80GB SATA (ST3808110as - 76319MB)
DVD-ROM (PATA - HL-DT-ST DVD-ROM CDR8164B)
eth0: Realtek 8139/8139c/8139c+
eth1: D-Link DGE-530T
This thread was automatically locked due to age.
