This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Installing Software ASG, Stuck

I just bought a Shuttle DS81 and thought this would be a great box for an ASG but I am running into issues with the installation.  

The install gets to "detecting other devices" and then gets stuck.

In reading the other posts and looking at the log it seems to me that the in built SD card reader may be causing the issue.

I tried logging into the BIOS and unfortunately there is no way to disable the card reader.  Are there any commands that will allow me to force an install to sda instead of getting stuck on sdb?

Or any other ideas?  I have a note into shuttle to see if there is a way to disable it but I haven't heard back as yet.

Many thanks in advance!


This thread was automatically locked due to age.
Parents Reply Children
  • I was able to use DisplayPort to install on bare metal DS57U. Running 10 days, no issues to date.


    Will try that option in the office tomorrow with a DP monitor - thanks a lot!

    Mosmurf
  • Will try that option in the office tomorrow with a DP monitor - thanks a lot!

    Mosmurf


    Confirmed working - hardware detection worked flawlessly via DP on the Shuttle DS57U which makes this inexpensive barebone a nice little firewall hardware for UTM9. Running UTM9 on bare-metal with 4 GB RAM and a Samsung 840 EVO on a 50 MBit UPC line for a week now. [:)]

    Mosmurf