This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Migrating from UTM 220 to SG 230

I've recently started a new position at a firm utilizing a Sophos UTM 220 appliance. This is my first time managing Sophos equipment.

They have purchased a brand new SG 230 appliance to replace the older unit. Am I correct that I should be able to take an unencrypted backup from the UTM 220 and restore it to the SG 230 via USB to transfer the previous configuration? The SG 230 will be completely replacing the UTM 220. I do know I should have the new license file ready to apply to the 230.

Current UTM version is v9.305-4. I've done some searching around but have not had much success finding much on migrating devices. Any gotchas I should be aware of? Any advice is appreciated. Thank you!

This thread was automatically locked due to age.

Parents

0 BAlfson over 9 years ago

Yes and no. For example, it won't work with a UTM 220 and a UTM 425, but it can work in VMs that are configured similarly. I haven't tried a 220 to a 210 or 230 - hopefully, trollvottel or another insider will come back and comment more explicitly.

Cheers - Bob

Sophos UTM Community Moderator
Sophos Certified Architect - UTM
Sophos Certified Engineer - XG
Gold Solution Partner since 2005

MediaSoft, Inc. USA
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 BAlfson over 9 years ago

Yes and no. For example, it won't work with a UTM 220 and a UTM 425, but it can work in VMs that are configured similarly. I haven't tried a 220 to a 210 or 230 - hopefully, trollvottel or another insider will come back and comment more explicitly.

Cheers - Bob

Sophos UTM Community Moderator
Sophos Certified Architect - UTM
Sophos Certified Engineer - XG
Gold Solution Partner since 2005

MediaSoft, Inc. USA
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data