Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 23 replies
  • Subscribers 5 subscribers
  • Views 36125 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

[9.201-23] Very slow and/or broken browsing.

Simon Shaw
After the update to 9.201 on our ASG320 we are getting very poor performance on web browsing using the HTTP Proxy.

If I turn the proxy off, everyone is very happy and pages are loading quickly with no errors.

If I turn it back on (we are operating in transparent mode, no auth), we get very slow page loads.  Some pages won't load at all or return other errors.

I have tried rebooting, cycling the proxy service, simplifying the rules massively, turning caching on or off, nothing seems to help.

We really need this functionality, any clues?  9.2 perhaps was too far in one update?


This thread was automatically locked due to age.
Parents
  • 0
    Who said this is a fix?

    It is a workaround until a fix is available...

    ----------
    Sophos user, admin and reseller.
    Private Setup:

    • XG: HPE DL20 Gen9 (Core i3-7300, 8GB RAM, 120GB SSD) | XG 18.0 (Home License) with: Web Protection, Site-to-Site-VPN (IPSec, RED-Tunnel), Remote Access (SSL, HTML5)
    • UTM: 2 vCPUs, 2GB RAM, 50GB vHDD, 2 vNICs on vServer (KVM) | UTM 9.7 (Home License) with: Email Protection, Webserver Protection, RED-Tunnel (server)
Reply
  • 0
    Who said this is a fix?

    It is a workaround until a fix is available...

    ----------
    Sophos user, admin and reseller.
    Private Setup:

    • XG: HPE DL20 Gen9 (Core i3-7300, 8GB RAM, 120GB SSD) | XG 18.0 (Home License) with: Web Protection, Site-to-Site-VPN (IPSec, RED-Tunnel), Remote Access (SSL, HTML5)
    • UTM: 2 vCPUs, 2GB RAM, 50GB vHDD, 2 vNICs on vServer (KVM) | UTM 9.7 (Home License) with: Email Protection, Webserver Protection, RED-Tunnel (server)
Children
No Data
Unfiltered HTML