Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 10 replies
  • Subscribers 4 subscribers
  • Views 10269 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Up2Date HA-System SYNCING Problem

kloana
Hi,

today i started an update on an active-passiv System to SW 9.106-17. The first node was upgraded successfully and took over all the traffic.

The second node was in reserved for upgrade state. So i startet also the upgrade on the second node. HA-Status is showing now SYNCING since the upgrade, and in HA-Livelog following messages are repeating periodically:

2013:10:20-20:37:20 primary-1 repctld[10485]: [e] do_monitor(1540): cannot get local database status 

2013:10:20-20:38:20 primary-1 repctld[10485]: [e] db_connect(2697): error while connecting to database: could not connect to server: No such file or directory 

2013:10:20-20:38:20 primary-1 repctld[10485]: [c] local_connection(2643): cannot connect to local database: could not connect to server: No such file or directory 

2013:10:20-20:38:20 primary-1 repctld[10485]: [e] do_monitor(1540): cannot get local database status 

2013:10:20-20:39:20 primary-1 repctld[10485]: [e] db_connect(2697): error while connecting to database: could not connect to server: No such file or directory 

2013:10:20-20:39:20 primary-1 repctld[10485]: [c] local_connection(2643): cannot connect to local database: could not connect to server: No such file or directory 

2013:10:20-20:39:20 primary-1 repctld[10485]: [e] do_monitor(1540): cannot get local database Status

Please can you take a look and point me to a solution, to get the second node back to slave working state?

Thanks in advance,
regards
Herbert


This thread was automatically locked due to age.
Parents
  • 0
    Yeah, I think that now you're stuck with taking the node off-line and re-imaging it from ISO.  You might be able to just do a factory reset on that node - I haven't tried it, so I'd be interested to know if that would work.

    By the way, why did you set a preferred node?

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0
    Yeah, I think that now you're stuck with taking the node off-line and re-imaging it from ISO.  You might be able to just do a factory reset on that node - I haven't tried it, so I'd be interested to know if that would work.

    By the way, why did you set a preferred node?

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
  • 0 in reply to BAlfson
    Hi,

    i don't know why i set this preferred node during installation?!?!

    OK i will give it a try, to reset the node to factory and start syncing again. But i can do this not before weekend, because currently i only have management access vie WEB and not locally,....

    Thanks
    regards
    Herbert
Unfiltered HTML