Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 10 replies
  • Answers 1 answer
  • Subscribers 5 subscribers
  • Views 41742 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Install.tar wasn't found on the installation media

MaxManus
I've tried all thinkable and unknown ways to transfer the ISO image of asg-9.100-8.1 (and latest_asg_v9_software.iso / asg-9.005-16.1-ASI-V2, etc.) onto a USB stick (rufus, Intubating, YUMI etc.). But each time, after the installer has partitioned SSD, popping the "Install.tar wasn't found on the installation media...." [:S] [:S]


I try to run the installation on a Jetway JBC373F38-525-B, 2GB RAM and 120 GB SSD.

Is there a problem with sysinstall limbs or a mismatch drivers?


This thread was automatically locked due to age.
Parents
  • 0
    As far as I know installation is only supported by burning a CD and using this one as installation media. Using a USB stick will not work.

    Times ago there was a special Astaro USB stick called "Smart Installer" that emulated a CD drive. I don't know if it's still available.
Reply
  • 0
    As far as I know installation is only supported by burning a CD and using this one as installation media. Using a USB stick will not work.

    Times ago there was a special Astaro USB stick called "Smart Installer" that emulated a CD drive. I don't know if it's still available.
Children
  • 0 in reply to TPok
    Go for a USB CD/DVD drive and burn a disc. This will work.

    ----------
    Sophos user, admin and reseller.
    Private Setup:

    • XG: HPE DL20 Gen9 (Core i3-7300, 8GB RAM, 120GB SSD) | XG 18.0 (Home License) with: Web Protection, Site-to-Site-VPN (IPSec, RED-Tunnel), Remote Access (SSL, HTML5)
    • UTM: 2 vCPUs, 2GB RAM, 50GB vHDD, 2 vNICs on vServer (KVM) | UTM 9.7 (Home License) with: Email Protection, Webserver Protection, RED-Tunnel (server)
Unfiltered HTML