Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 19 replies
  • Subscribers 4 subscribers
  • Views 6763 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

HA active/active, firewall rules stop working 8.202

beheerder1
We have some problems lately, some of our firewall rules stop working during the day, after a reboot of one of the astaro's or sometimes after like 4 hours they are suddenly working again.

Another question, what you see on the attachment (HA configured active-passive) both asg320 shows active. Is that correct?


I updated last week to 8.202, then above problem occurred, can i simple restore back to 8.103? (from automatic backup)


This thread was automatically locked due to age.
Parents
  • 0
    No I didn't say that [[:)]] Its a kind of spoofing protection, but more granular.
    But like everywhere, if you increase the complexity the changes increase that
    something will break...

    And I'm not saying that its our product [[:)]] You get what you configure.
    In above issue again, problem was, that two interface are connected to
    the same LAN segment and thats just a broken network setup...

    Cheers
     Ulrich


    It
Reply
  • 0
    No I didn't say that [[:)]] Its a kind of spoofing protection, but more granular.
    But like everywhere, if you increase the complexity the changes increase that
    something will break...

    And I'm not saying that its our product [[:)]] You get what you configure.
    In above issue again, problem was, that two interface are connected to
    the same LAN segment and thats just a broken network setup...

    Cheers
     Ulrich


    It
Children
No Data
Unfiltered HTML