Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 19 replies
  • Subscribers 3 subscribers
  • Views 6713 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

HA active/active, firewall rules stop working 8.202

beheerder1
We have some problems lately, some of our firewall rules stop working during the day, after a reboot of one of the astaro's or sometimes after like 4 hours they are suddenly working again.

Another question, what you see on the attachment (HA configured active-passive) both asg320 shows active. Is that correct?


I updated last week to 8.202, then above problem occurred, can i simple restore back to 8.103? (from automatic backup)


This thread was automatically locked due to age.
Parents
  • 0
    OK, so, do you agree that it's extremely, extremely rare that it's a good idea to bind a definition to an interface, and that it's more likely to cause problems for anyone that's not intimately familiar with iptables internals?

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0
    OK, so, do you agree that it's extremely, extremely rare that it's a good idea to bind a definition to an interface, and that it's more likely to cause problems for anyone that's not intimately familiar with iptables internals?

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Unfiltered HTML