This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

HA active/active, firewall rules stop working 8.202

We have some problems lately, some of our firewall rules stop working during the day, after a reboot of one of the astaro's or sometimes after like 4 hours they are suddenly working again.

Another question, what you see on the attachment (HA configured active-passive) both asg320 shows active. Is that correct?

I updated last week to 8.202, then above problem occurred, can i simple restore back to 8.103? (from automatic backup)

This thread was automatically locked due to age.

Parents

0 da_merlin over 13 years ago

Yes both nodes are active and working.

Can you be a bit more specific about what packet filter rules did not work or
what traffic is not working?

Do you use IPS or Application Control?

Cheers
Ulrich
Cancel
Vote Up 0 Vote Down

Cancel
0 beheerder1 over 13 years ago in reply to da_merlin

Hello,
thanks for your reply.

We dont use IPS or application control.

The rule that stops working is a LDAP ssl login from outside to inside.

- Allow 10.10.4.105 --> 192.168.1.101 and 192.168.1.102 port 636
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 beheerder1 over 13 years ago in reply to da_merlin

Hello,
thanks for your reply.

We dont use IPS or application control.

The rule that stops working is a LDAP ssl login from outside to inside.

- Allow 10.10.4.105 --> 192.168.1.101 and 192.168.1.102 port 636
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data