Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 14 replies
  • Subscribers 4 subscribers
  • Views 3043 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

[8.202][SWAP] increasing

rfcat_vk
Hi,
my ASG is setup as follows:-
4gb ram
amd x2 cpu
3 NICs
320gb disk
Uptime over 10 days
Lots of functions enabled, IDS tuned to remove unused services

Memory usage 45%
Swap 2% and growing.

Ian


This thread was automatically locked due to age.
Parents
  • 0 in reply to BarryG
    8% is not significant.

    Barry


    If it was stable, you're correct.  But it will keep going until the system performance is affected, then I have to reboot.
  • 0 in reply to PaulHolt
    In answer to Bob's questions?

    My system is using IPv4 and IPv6. The IPv6 is via tunnel broker.

    There are many of the following lines in the ASG support tab window (top)

    root      6452  1.4  1.4  62072 56372 ?        S    Oct06 264:50 /usr/sbin/acc-agent.plx --verbose=3 --daemon 
    root      9264  0.0  0.0      0     0 ?        Z    Oct06   0:00  \_ [iplocator.plx] 
    root     28865  0.0  0.0      0     0 ?        Z    Oct06   0:00  \_ [iplocator.plx] 

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Reply
  • 0 in reply to PaulHolt
    In answer to Bob's questions?

    My system is using IPv4 and IPv6. The IPv6 is via tunnel broker.

    There are many of the following lines in the ASG support tab window (top)

    root      6452  1.4  1.4  62072 56372 ?        S    Oct06 264:50 /usr/sbin/acc-agent.plx --verbose=3 --daemon 
    root      9264  0.0  0.0      0     0 ?        Z    Oct06   0:00  \_ [iplocator.plx] 
    root     28865  0.0  0.0      0     0 ?        Z    Oct06   0:00  \_ [iplocator.plx] 

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Children
No Data
Unfiltered HTML