Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 14 replies
  • Subscribers 3 subscribers
  • Views 3001 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

[8.202][SWAP] increasing

rfcat_vk
Hi,
my ASG is setup as follows:-
4gb ram
amd x2 cpu
3 NICs
320gb disk
Uptime over 10 days
Lots of functions enabled, IDS tuned to remove unused services

Memory usage 45%
Swap 2% and growing.

Ian


This thread was automatically locked due to age.
Parents
  • 0
    I had the problem of swap usage increasing and slowing down ASG to a crawl ever since I upgraded to 8.2. I was running with 2GB RAM. 

    To permanently fix the problem, I added 4GB RAM to increase the total RAM to 6GB. It has been 8 days 16h 17m since the firewall is up with swap staying happily at 0%. The peak memory usage has been 33%, close to 2GB.
Reply
  • 0
    I had the problem of swap usage increasing and slowing down ASG to a crawl ever since I upgraded to 8.2. I was running with 2GB RAM. 

    To permanently fix the problem, I added 4GB RAM to increase the total RAM to 6GB. It has been 8 days 16h 17m since the firewall is up with swap staying happily at 0%. The peak memory usage has been 33%, close to 2GB.
Children
No Data
Unfiltered HTML