This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Ich10r raid support?

Good morning,
I'm trying to install ASG on ICH10 Raid controler on this motherboard.
When I need to setup disks it see two phisical drives and not one logical drive (raid1)
I've checked HCL and ICH10R is compatible with ASG8...

How can I get hardware support?
My controller can be setup as "Intel Matrix Storage" or as "Adaptec mode" but in both ways I see two hard drives.

Can you help me?
Thanks
Andrea

This thread was automatically locked due to age.

Parents

0 William Warren over 13 years ago

ICHx or any motherboard based RAID if FRAID or fakeraid. It's not even true software raid. Linux Kernel software raid(either raid 1 or zero) will NOT impact system performance. FRIAD WILL impact system performance. If you want raid areca/3ware is your best bet as even some adaptec's are nothing more than glorified FRAID cards.

Astaro only supports true hardware raid. It does not support either FRAID or software raid.

Owner: Emmanuel Technology Consulting

http://etc-md.com

Former Sophos SG(Astaro) advocate/researcher/Silver Partner

PfSense w/Suricata, ntopng,

Other addons to follow
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 William Warren over 13 years ago

ICHx or any motherboard based RAID if FRAID or fakeraid. It's not even true software raid. Linux Kernel software raid(either raid 1 or zero) will NOT impact system performance. FRIAD WILL impact system performance. If you want raid areca/3ware is your best bet as even some adaptec's are nothing more than glorified FRAID cards.

Astaro only supports true hardware raid. It does not support either FRAID or software raid.

Owner: Emmanuel Technology Consulting

http://etc-md.com

Former Sophos SG(Astaro) advocate/researcher/Silver Partner

PfSense w/Suricata, ntopng,

Other addons to follow
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data