Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 7 replies
  • Subscribers 8 subscribers
  • Views 3061 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

High memory swapping since update to Sophos UTM 9.714-4

TheExpert

Hi all,

before the update to Sophos UTM 9.714-4 I had 10% swap usage in maximum. Since the update it increased day by day until yesterday to about 75%. Then I shut down the HA-Cluster (active/passive) and started the two nodes again. The swap usage increased again to 20%.

There was no change of the configuration. There was only the update to Sophos UTM 9.714-4.

Can anyone confirm this behavior of the newest release of the Sophos UTM? Is there any idea to solve this?

Thank you.



This thread was automatically locked due to age.
Parents
  • 0

    I'm on day one since updating to 9.714 (from 9.710).  So far I don't see anything unusual.  Memory use appears to be slightly increased, from ~20% to 22% (16gb assigned). We'll see what it's like after a week or two.

    Not noticing high cpu either.

  • 0 in reply to Jay Jay

    With 16GB I doubt you see any swapping at all - that's plenty.

    OPNSense 64-bit | Intel Xeon 4-core v3 1225 3.20Ghz
    16GB Memory | 500GB SSD HDD | ATT Fiber 1GB
    (Former Sophos UTM Veteran, Former XG Rookie)

Reply Children
No Data
Unfiltered HTML