Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 6 replies
  • Subscribers 7 subscribers
  • Views 3904 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SG 210 Rev 1 specs

JSeiler

Does anyone happen to have the spec sheet for a Rev 1 SG 210?  I'm working on an issue of slow throughput on the revision and believe we might be hitting the upper limit of what it can do.  We have turned off all the extras, but still find slow and laggy Citrix Remote Desktop session when total interface throughput reaches 100 - 150 Mb/s.

There are no interface errors anywhere from that we can see.  CPU hovers around 25% utilization and ram is about 18% consumed out of 8GB.

The only other thought is that there are a lot of rules logging to the HDD.



This thread was automatically locked due to age.
Parents
  • 0

    Maybe the HDD is getting bad?

    Mit freundlichem Gruß, best regards from Germany,

    Philipp Rusch

    New Vision GmbH, Germany
    Sophos Silver-Partner

    If a post solves your question please use the 'Verify Answer' button.

  • 0 in reply to PhilippRusch

    Bob, checking your list the items were all disabled. However, there were some 'exceptions' that were still enabled.  I disabled these just incase it was still invoking some type of IPS process.

    Per Philipp's question, did the Rev 1 have an HDD or SDD?  I am looking at a Rev 3 unit and it reports an SSD is installed.

Reply
  • 0 in reply to PhilippRusch

    Bob, checking your list the items were all disabled. However, there were some 'exceptions' that were still enabled.  I disabled these just incase it was still invoking some type of IPS process.

    Per Philipp's question, did the Rev 1 have an HDD or SDD?  I am looking at a Rev 3 unit and it reports an SSD is installed.

Children
Unfiltered HTML