This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

missing Ethernet in SG 230

We have 2 SG230 with both eth0 up to eth5 (HArdware)

However - we can only assing 5 ethernet interfaces to acutal interfaces (eg WAN, DMZ, internal, external, test).

If I try to create another interface - the "Hardware" selection is empty.

This is the same for both SG230 we have (not in HA of course, both standalone)

This thread was automatically locked due to age.
  • Hello,

    you just remove the "Sync NIC" from here and deactivate HA, then (Operation mode to "Off"):

    This should should free up the missing Ethernet interface for you.

    Mit freundlichem Gruß, best regards from Germany,

    Philipp Rusch

    New Vision GmbH, Germany
    Sophos Silver-Partner

    If a post solves your question please use the 'Verify Answer' button.