Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 1 reply
  • Subscribers 5 subscribers
  • Views 1097 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

HA configuration failes

FrancWest

Hi,

I'm trying to create a active/passive HA-pair running 9.705-3 on 2 hyper-v 2019 hosts. I've enabled MAC spoofing on the NIC's. One UTM is configured in HA Active/Passive, the other is on 'automatic configuration'. I can't get this to work. In the logs of the UTM with the automatic configuration I'm getting these errors:

2021:01:25-01:46:58 firewall-2 ha_zeroconf[6501]: id="3800" severity="info" sys="System" sub="ha" name="No other asg zeroconf node found!"
2021:01:25-01:46:58 firewall-2 ha_zeroconf[6501]: id="3800" severity="info" sys="System" sub="ha" name="Interface eth3 is up! Searching for active HA system!"
2021:01:25-01:46:58 firewall-2 ha_zeroconf[6501]: id="3800" severity="info" sys="System" sub="ha" name="Using temporary ip 198.19.250.158"
2021:01:25-01:47:06 firewall-2 ha_zeroconf[6501]: id="3800" severity="info" sys="System" sub="ha" name="No HA active, trying asg zeroconf!"
2021:01:25-01:47:31 firewall-2 ha_zeroconf[6501]: id="3800" severity="info" sys="System" sub="ha" name="No other asg zeroconf node found!"
2021:01:25-01:47:31 firewall-2 ha_zeroconf[6501]: id="3800" severity="info" sys="System" sub="ha" name="Interface eth3 is up! Searching for active HA system!"
2021:01:25-01:47:31 firewall-2 ha_zeroconf[6501]: id="3800" severity="info" sys="System" sub="ha" name="Using temporary ip 198.19.250.140"
2021:01:25-01:47:34 firewall-2 ha_zeroconf[6501]: id="3800" severity="info" sys="System" sub="ha" name="Found master 198.19.250.1 on eth3, getting HA configuration..."
2021:01:25-01:47:34 firewall-2 ha_zeroconf[6501]: id="3800" severity="info" sys="System" sub="ha" name="Using temporary ip 198.19.250.152"
2021:01:25-01:47:39 firewall-2 ha_zeroconf[6501]: id="3802" severity="error" sys="System" sub="ha" name="Error receiving message from socket!"
2021:01:25-01:47:44 firewall-2 ha_zeroconf[6501]: id="3802" severity="error" sys="System" sub="ha" name="Error receiving message from socket!"
2021:01:25-01:47:49 firewall-2 ha_zeroconf[6501]: id="3802" severity="error" sys="System" sub="ha" name="Error receiving message from socket!"
2021:01:25-01:47:54 firewall-2 ha_zeroconf[6501]: id="3802" severity="error" sys="System" sub="ha" name="Error receiving message from socket!"
2021:01:25-01:47:59 firewall-2 ha_zeroconf[6501]: id="3802" severity="error" sys="System" sub="ha" name="Error receiving message from socket!"
2021:01:25-01:48:04 firewall-2 ha_zeroconf[6501]: id="3802" severity="error" sys="System" sub="ha" name="Error receiving message from socket!"
2021:01:25-01:48:09 firewall-2 ha_zeroconf[6501]: id="3802" severity="error" sys="System" sub="ha" name="Error receiving message from socket!"
2021:01:25-01:48:14 firewall-2 ha_zeroconf[6501]: id="3802" severity="error" sys="System" sub="ha" name="Error receiving message from socket!"
2021:01:25-01:48:19 firewall-2 ha_zeroconf[6501]: id="3802" severity="error" sys="System" sub="ha" name="Error receiving message from socket!"
2021:01:25-01:48:24 firewall-2 ha_zeroconf[6501]: id="3802" severity="error" sys="System" sub="ha" name="Error receiving message from socket!"

The 'error receiving message from socket' repeats itself every 5 seconds and the HA-pair isn't established.

Any idea?

Frank.


This thread was automatically locked due to age.
Unfiltered HTML