Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 7 replies
  • Subscribers 8 subscribers
  • Views 1607 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos SG210 HA Configuration

MahdiX

Hi,

I'm running two SG210 in my company in Active/Passive mode.

We are going to set up a disaster site, and as a part of our plan, I want to know how we can manage to setup the same Sophos HA in disaster site.

Is it possible to extend our cluster from 2 to 4 devices? or there is any other solution?

All our physical and virtual servers, storage devices, network switches, etc. are in HA mode with disaster site, but the sophos cluster.

Our goal is that everything be as automatic as possible.

Regards.



This thread was automatically locked due to age.
Parents
  • 0

    Dear Alex and Bob,
    Thank you for your answers,

    I have the exact same architecture, devices, and network in both primary and disaster sites.

    I think you suggest me to follow this scenario : Primary (1 Active + 1 Passive) + DR (1 passive) devices, am I right? So about the take over, if the active device in primary site fails,  which passive device becomes primary? Is it manageable or not?

    Reagrds.

  • 0 in reply to MahdiX

    Dear MahdiX,

    that’s indeed a good question. Leader election can be done by multiple ways. But I didn’t find any specific information about that. Maybe you could ask a sales representative or support for that.

    Best regards 

    Alex 

    -

Reply Children
No Data
Unfiltered HTML