Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 7 replies
  • Subscribers 8 subscribers
  • Views 1593 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos SG210 HA Configuration

MahdiX

Hi,

I'm running two SG210 in my company in Active/Passive mode.

We are going to set up a disaster site, and as a part of our plan, I want to know how we can manage to setup the same Sophos HA in disaster site.

Is it possible to extend our cluster from 2 to 4 devices? or there is any other solution?

All our physical and virtual servers, storage devices, network switches, etc. are in HA mode with disaster site, but the sophos cluster.

Our goal is that everything be as automatic as possible.

Regards.



This thread was automatically locked due to age.
Parents
  • 0

    Dear Alex and Bob,
    Thank you for your answers,

    I have the exact same architecture, devices, and network in both primary and disaster sites.

    I think you suggest me to follow this scenario : Primary (1 Active + 1 Passive) + DR (1 passive) devices, am I right? So about the take over, if the active device in primary site fails,  which passive device becomes primary? Is it manageable or not?

    Reagrds.

  • 0 in reply to MahdiX

    Helli Mahdi,

    You have two sites in HA-Setup. Do you have redundant switches on each of the sites? No? Then why double the firewalls?

    See: I would have the active node of the Sophos Firewall Hardware at the "Mainsite" and the other passvie node will be put at the "Failover-Site", that's it. Like this you have redundant nodes and failover capacity.

    Mit freundlichem Gruß, best regards from Germany,

    Philipp Rusch

    New Vision GmbH, Germany
    Sophos Silver-Partner

    If a post solves your question please use the 'Verify Answer' button.

  • 0 in reply to PhilippRusch

    Yes, I do.

    I have redundant switches on each of the sites, and two SG210 in active/passive mode in main site.

    I've figured out all HA plan, but for the firewall.

    I'm looking for an automated solution which includes exact firewall cluster in disaster site (2xSG210 in active/passive mode),

    I need firewall HA in both side.

    If not possible, I've to switch it manually.

Reply
  • 0 in reply to PhilippRusch

    Yes, I do.

    I have redundant switches on each of the sites, and two SG210 in active/passive mode in main site.

    I've figured out all HA plan, but for the firewall.

    I'm looking for an automated solution which includes exact firewall cluster in disaster site (2xSG210 in active/passive mode),

    I need firewall HA in both side.

    If not possible, I've to switch it manually.

Children
No Data
Unfiltered HTML