Thread Info
  • State Verified Answer
  • +1 person also asked this people also asked this
  • Locked Locked
  • Replies 8 replies
  • Subscribers 6 subscribers
  • Views 3101 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos UTM connected behind another router

James C

Hi,

I have this following network architecture.

Internet --> EdgeRouter Pro ---> Network Switch.

I have connected my Sophos UTM SG135 appliance (from eth0 interface with ip address 192.168.40.2/24) to the EdgeRouter (at eth2 inteface with ip address 192.168.40.1/24).

My question is how can to configure the Sophos UTM to have internet access? I tried to tick the box for default gateway with 192.168.40.1 on eth0 but its getting error message of "Default Gateways only allowed on Uplink Balancing interfaces. Interface will be added to Uplink Balancing.".

Thanks!



This thread was automatically locked due to age.
Parents
  • 0

    Your SG has a configured def. GW already. Some IF has a GW-entry.

    If only one interface points towards the Internet, only this IF should contain the def.GW.

     


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

Reply
  • 0

    Your SG has a configured def. GW already. Some IF has a GW-entry.

    If only one interface points towards the Internet, only this IF should contain the def.GW.

     


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

Children
No Data
Unfiltered HTML