Up2Date stuck on slave HA

Question

SG 310

Here is what the live log says.... 
 
 2019:08:16-09:17:29 epi-colo-fw01-2 repctl[6582]: [i] recheck(1057): got ALRM: replication recheck triggered Setup_replication_done = 1 
 2019:08:16-09:22:29 epi-colo-fw01-2 repctl[6582]: [i] recheck(1057): got ALRM: replication recheck triggered Setup_replication_done = 1 
 2019:08:16-09:27:29 epi-colo-fw01-2 repctl[6582]: [i] recheck(1057): got ALRM: replication recheck triggered Setup_replication_done = 1 
 2019:08:16-09:32:29 epi-colo-fw01-2 repctl[6582]: [i] recheck(1057): got ALRM: replication recheck triggered Setup_replication_done = 1 
 2019:08:16-09:37:29 epi-colo-fw01-2 repctl[6582]: [i] recheck(1057): got ALRM: replication recheck triggered Setup_replication_done = 1 
 2019:08:16-09:42:29 epi-colo-fw01-2 repctl[6582]: [i] recheck(1057): got ALRM: replication recheck triggered Setup_replication_done = 1 
 2019:08:16-09:47:29 epi-colo-fw01-2 repctl[6582]: [i] recheck(1057): got ALRM: replication recheck triggered Setup_replication_done = 1 
 2019:08:16-09:52:29 epi-colo-fw01-2 repctl[6582]: [i] recheck(1057): got ALRM: replication recheck triggered Setup_replication_done = 1 
 2019:08:16-09:57:29 epi-colo-fw01-2 repctl[6582]: [i] recheck(1057): got ALRM: replication recheck triggered Setup_replication_done = 1 
 2019:08:16-10:02:29 epi-colo-fw01-2 repctl[6582]: [i] recheck(1057): got ALRM: replication recheck triggered Setup_replication_done = 1 
 2019:08:16-10:07:30 epi-colo-fw01-2 repctl[6582]: [i] recheck(1057): got ALRM: replication recheck triggered Setup_replication_done = 1 
 2019:08:16-10:12:30 epi-colo-fw01-2 repctl[6582]: [i] recheck(1057): got ALRM: replication recheck triggered Setup_replication_done = 1

I was thinking of running auisys.plx --upto 9.605-1

dirkkotte · Accepted Answer

1. i would try to reboot the slave. 
 2. do you switch to active/active cluster within ha config? 
 
 Dirk

James Shakour · Answer

Maybe factory reset the slave from the front panel?