Thread Info
  • Locked Locked
  • Replies 7 replies
  • Subscribers 6 subscribers
  • Views 3462 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Utm220 rev 5 install from usb

Renede Bie

Hi

I have some utm220 boxes I downloaded the latest both the hardware and software installer.

Because I got issues installing I want to post here what worked for me.

Hardware install iso & software install.

1 make bootable usb with rufus

2 boot usb in upper usb slot the ofher can be used for keyboard

3 boot system

4 press enter at first screen

5 alt-f2 for console

6 type: mount /dev/sdb1 /install

7 alt-f1 and continue

If you have an utm220 with original cpu/mem/harddisk you can install the hardware iso.

If you want to be flexible install software version.

It worked with an SSD connected and quadcore cpu.

The display is not working yet will update this post when I have updated that.



This thread was automatically locked due to age.
Parents

  • Update enable lcd on UTM software install.

    1 login with SSH

    2 vi /etc/asg

    3 add these lines:

    ASG_VERSION="220"

    LCD4LINUX_HW="LCD-162"

    ASG_SUBTYPE="r5"

  • in reply to Renede Bie

    I have a 220r5 as well with the ssi install I had originally deleted the asg file to get the home license to apply. Adding a new asg file with the above comments did not enable the lcd to work. Still shows a bunch of black squares. I know the original file has other comments including an "ID" comment. Perhaps that is required? I read in other thread at one point that all that's required to install the software license is to delete the "ID" comment so I'm really not sure where that leaves things as far as getting the lcd working. It would be nice. I already checked if I made any typos but I'll check again just to be absolutely certain. If I don't post back on that topic it's because there is no typo.

  • in reply to plecavalier

    The info 3 lines are exact copy of my config. Maybe your device has another type of display?

    Sorry it works on all 220r5 overhere.

  • in reply to plecavalier

    Just a quick update to my own post above. I found the post whereby it is suggested to only delete the "ID" comment in the asg file to get the home license on the SSI install to apply and in the same thread it is mentioned that to get the LCD working on the 220 the entry is as follows:

    ASG_VERSION=”220″
    LCD4LINUX_HW=”LCM-162″
    ASG_SUBTYPE=”r5″

     

    So the LCD4LINUX entry differs from the above mentioned. Could be a typo especially since "lcd-162" is more logical than "lcm-162" but I'll give that a try when I get a chance and write back.

Reply
  • in reply to plecavalier

    Just a quick update to my own post above. I found the post whereby it is suggested to only delete the "ID" comment in the asg file to get the home license on the SSI install to apply and in the same thread it is mentioned that to get the LCD working on the 220 the entry is as follows:

    ASG_VERSION=”220″
    LCD4LINUX_HW=”LCM-162″
    ASG_SUBTYPE=”r5″

     

    So the LCD4LINUX entry differs from the above mentioned. Could be a typo especially since "lcd-162" is more logical than "lcm-162" but I'll give that a try when I get a chance and write back.

Children
No Data
Unfiltered HTML