This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Firmware update for Sophos SG230

 Hi I have 2 SG230 with HA and Stack, their current firmware version is 9.408-4

 

What is the recommended firmware version for an update?

Do I have to update 1 after 1 older version or can I just update with the recommended version?

 



This thread was automatically locked due to age.
Parents
  • Hi Derrick and welcome to the UTM Community!

    If you were to select the Up2Date to 9.506, the system would automatically install the earlier Up2Dates in sequence and then reboot once after all were installed.

    If you read here, you will see that some people with HA had problems when Up2Dating to 9.510.  9.506 has been the most reliable in 9.5, but there are enough improvements in 9.510, that you might want to take the less-than-1% risk of having the same problems as some others in HA.

    In any case, I'm not yet recommending 9.6.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • Hi Derrick and welcome to the UTM Community!

    If you were to select the Up2Date to 9.506, the system would automatically install the earlier Up2Dates in sequence and then reboot once after all were installed.

    If you read here, you will see that some people with HA had problems when Up2Dating to 9.510.  9.506 has been the most reliable in 9.5, but there are enough improvements in 9.510, that you might want to take the less-than-1% risk of having the same problems as some others in HA.

    In any case, I'm not yet recommending 9.6.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data