Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 7 replies
  • Subscribers 7 subscribers
  • Views 7349 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Adding an additional network card NIC

JLunch

I'm trying to add an additional network card via the CLI. All the old support for mentioned editing this file that doesn't exist on UTM 9.5

/etc/modules.conf

Does anyone have updated instructions on what to do?

If I do the following I see the 2nd module that I now need

# cat modules
e1000
r8169

Its just that the hardware doesn't show up in the webadmin. 



This thread was automatically locked due to age.
Parents
  • 0

    If you add a card that uses the same driver as an existing NIC, then the additional card should be recognized when the UTM boots.  If you need a different driver, you must re-install from ISO as the installation process only loads drivers for the devices it can "see."  Am I understanding your question?

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0

    If you add a card that uses the same driver as an existing NIC, then the additional card should be recognized when the UTM boots.  If you need a different driver, you must re-install from ISO as the installation process only loads drivers for the devices it can "see."  Am I understanding your question?

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
  • 0 in reply to BAlfson

    So there is no CLI hack? :-(

     

    Strange because I put in another Realtek NIC and it showed up under hardware in the webadmin and allowed me to use it. But the r8169 I had didn't 

  • 0 in reply to JLunch

    the utm has no driver for the chipset r8169... if you put in a nic with a older realtek chipset it should be recognized.

    greets

    zaphod
    ___________________________________________

    Home: Zotac CI321 (8GB RAM / 120GB SSD)  with latest Sophos UTM
    Work: 2 SG430 Cluster / many other models like SG105/SG115/SG135/SG135w/...

  • 0 in reply to zaphod

    So there are a bunch of drivers in there by default and we don't need to reinstall to get them active? Is there a list somewhere? 

  • 0 in reply to JLunch

    the utm depends on a base linux system which is modified by sophos. 

    you can log in with ssh and use the basic commands to see which drivers are build in. something like lsmod 

    it depends on the linux kernel which is used.. 

    and... it is unsupported to manually add drivers..

     

    so newer chipsets will be supported when newer kernels are used. 

     

     

    greets

    zaphod
    ___________________________________________

    Home: Zotac CI321 (8GB RAM / 120GB SSD)  with latest Sophos UTM
    Work: 2 SG430 Cluster / many other models like SG105/SG115/SG135/SG135w/...

  • 0 in reply to JLunch

    There are no drivers installed during the loading of the UTM package except for the devices visible to the installer.  It's not plug-n-play.

    There's a Hardware Compatibility List (HCL) in the KnowledgeBase and an unofficial one at the top of the Hardware forum here.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Unfiltered HTML