This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

UTM boot and install from USB flash drive

Hi,

I have a UTM 425 unit that boots fine using a USB CDROM with ISO Image of XG or UTM.

When I create a USB Flash Drive (Using latest Rufus) it won't boot at all.  I have created the flash drive with both DD and standard ISO options with RUFUS.   I set the BIOS priority for the flash drive (it sees the drive) but then on boot the cursor just sits there and blinks.

The exact same flash drive correctly boots without issue on another appliance that I have (an XG 105 appliance).

Any ideas?

Thanks!

Dave



This thread was automatically locked due to age.