Thread Info
  • State Verified Answer
  • +1 person also asked this people also asked this
  • Locked Locked
  • Replies 3 replies
  • Subscribers 4 subscribers
  • Views 2403 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Site-to-Site SSL VPN (UTM 2 XG)

Firewall-Tom

Hallo,

ich möchte eine Site-to-Site SSL VPN Tunnel einrichten.

Auf der einen Seite steht eine UTM (FW 9.705-3) und auf der anderen ein XG (SFOS 18.0.4 MR-4).

Die UTM soll der Server sein, da diese via mit fixer IPv4 Adresse online ist. Die UTM erstellt eine epc (verschlüsselt) oder apc (unverschlüsselte) Konfigurationsdatei:

Will ich diese in die XG importieren, erhalte ich die Fehlermeldung:

Was ist zu tun ?

Danke !!



This thread was automatically locked due to age.
Parents
  • FormerMember
    +1 FormerMember

    Hi ,

    Thank you for reaching out to the Community! 

    The site-to-site SSL VPN will not work if you make the UTM as a server. I tested this in my LAB. However, you can try to make the XG as a server and import the UTM configuration; it works. 

    If you can't make your XG firewall as a server for some reason, try to configure IPsec site to site VPN tunnel. 

    Thanks,

Reply
  • FormerMember
    +1 FormerMember

    Hi ,

    Thank you for reaching out to the Community! 

    The site-to-site SSL VPN will not work if you make the UTM as a server. I tested this in my LAB. However, you can try to make the XG as a server and import the UTM configuration; it works. 

    If you can't make your XG firewall as a server for some reason, try to configure IPsec site to site VPN tunnel. 

    Thanks,

Children
No Data
Unfiltered HTML