Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 5 replies
  • Subscribers 4 subscribers
  • Views 1895 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

UTM 9.702-1 HA - Hohe CPU-Last

Mr.Roboto

Guten Morgen,

 

auf meiner SG230 ist wahrscheinlich seit dem Update auf 9.702-1 die CPU-Last sehr hoch ~60%.
Hat von euch auch jemand so ein Verhalten?

Das System ist ein HA-Cluster mit Active/Slave.

Folgenden Prozess hab ich gefunden der wohl die meiste Last generiert:

root      4977 64.2  0.5  73664 44008 ?        R    09:36   0:00      \_ confd [worker:prpc:system]


This thread was automatically locked due to age.
Parents
  • 0

    Hallo,

    (Sorry, my German-speaking brain isn't creating thoughts at the moment. [:(])

    What happens if you failover to the Slave?  From the command line, do a graceful failover with:

    ha_daemon -c takeover

    MfG - Bob (Bitte auf Deutsch weiterhin.)

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0 in reply to BAlfson

    Sorry for my late reply and thanks for your help.
    If've rebooted the both UTM simultaneously, ended up in well loaded HA-Cluster. Strange.... 

  • 0 in reply to Mr.Roboto

    Did not work, my hope was blown up.
    The HA link shows ~700MBit of traffic out of the primary!!!

    Mhhh...process show ~60%CPU at this line:

    root     27807 66.6  0.4  73904 32940 ?        R    09:31   0:00      \_ confd [worker:prpc:system]
Reply Children
No Data
Unfiltered HTML