This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to configure sophos UTM with my existing router?

Hello my name is Mike and iam a newbie at this... right now im trying to set up sophos atm on small office, the business has a aris modem/router build in from Spectrum, i have a dell small factor computer with a EXPI9402PT PRO/1000 PT Dual Port Server NIC... the installation of sophos went ok, however the issue is i cant connect to the sophos admin... my ip are

sophos utm: 192.168.1.1:4444

router ip : 192.168.1.2 (dhcp is disable since i want the UTM to handle this)

ip range starts :192.168.1.3

ran a cable from the modem/router (lan ports) to the UTM and from the UTM to the switch (modem/router---->UTM---->SWITCH----->PCS), however i cant access it from the network when entering the managing ip (https://192.168.1.1:4444) nor when connecting directly to the utm through the admin nic and setting ip manually on my computer.

Could you please explain me what i doing wrong? 

Also  another question is :  Can i use the modem/router as a AP ? or i have to add another router?

Thank you 



This thread was automatically locked due to age.
Parents
  • Hi, Mike, and welcome to the UTM Community!

    If you read here, you will see that the standard approach is to bridge the modem/router and use a different wireless AP.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • Hi, Mike, and welcome to the UTM Community!

    If you read here, you will see that the standard approach is to bridge the modem/router and use a different wireless AP.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data